HH437549-HH437510XX

HH437549-HH437510XX TS (Single Row Tapered Roller Bearings) (Imperial) consist of a tapered inner ring assembly and an outer ring. HH437549-HH437510XX bore dia is 6.5″. Its out dia is 13.25″. HH437549-HH437510XX roller material is Chrome Steel. Its seal type is Open. The HH437549-HH437510XX TS (Single Row Tapered Roller Bearings) (Imperial) can bear both radial and axial loads with ease and provides low friction during operation even under the most severe conditions.

Typical applications include:

Gearing Systems and Transmissions, Thermal Power Coal Transporters, Port Equipment, Rubber and other Industrial applications, Machine Tool Spindles, Gear Reducer, Automotive Drive Axle, Aircraft wheels, Agricultural Wheels, Tensioning Roller, Raking Machine, Single Row and Mining Equipment, Railroad Axle-box, etc.

General Selection Factors

Several factors must be considered for choosing tapered roller bearings. These factors include the roller material, design, shields and seals, cage, Annual Bearing Engineering Committee (ABEC) grade, radial clearance, and lubricant, etc.

Part Number	HH437549-HH437510XX
Brand: BearingMaker	Interchangeable With: Timken
System of Measurement	Inch
Type	Bearing
Cone Part Number	HH437549
Cup Part Number	HH437510XX
Bearing Type	Roller
Roller Bearing Type	Tapered
For Load Direction	Combined
Construction	Single Row
Seal Type	Open
Cups Type	Standard
Series	HH437500
Bore Dia	6.5″
Bore Dia Tolerance	+0.001″ to 0
Outer Dia	13.25″
Outer Dia Tolerance	+0.002″ to 0
Cone Width	3.75″
Cone Width Tolerance	+0.003″ to -0.01
Cup Width	2.75″
Cup Width Tolerance	+0.002″ to -0.01
Width	3.6251″
Width Tolerance	+0.014″ to -0.01″
Cone Backface ToClear Radius	0.13″
Cup Backface ToClear Radius	0.250″
Cone Frontface Backing Diameter	8.74″
Cone Backface Backing Diameter	7.72″
Cup Frontface Backing Diameter	12.13″
Cup Backface Backing Diameter	11.69″
Cage Cone Frontface Clearance	0.09″
Cage Cone Backface Clearance	0.43″
Effective Center Location	-0.84″
Ring Material	Chrome Steel
Roller Material	Chrome Steel
Cage Material	Steel
Dynamic Radial Load	372000 lbf
Static Radial Load	434000 lbf
Dynamic Radial Rating(90 Million Revolutions)(C90)	96500 lbf
Dynamic Thrust Rating(90 Million Revolutions)(Ca90)	61400 lbf
Lubrication	Required
Temperature Range	-30° to 110 °C
ABEC Rating	ABEC-1
Radial Clearance	Standard (Available in C3/C4/C5)
RoHS	Compliant
REACH	Compliant
Weight	82.00 lb