
SMF73C-ZZ #3 LD Hybrid Ceramic Flanged Ball Bearing

| Part Number | SMF73C-ZZ #3 LD |
| System of Measurement | Metric |
| Bearing Type | Ball |
| For Load Direction | Radial |
| Construction | Single Row |
| Inner Ring Type | Standard |
| Seal Type | Shielded |
| Seal No | Two Shields |
| Seal Material | Stainless Steel |
| Bore Dia | 3 mm |
| Outer Dia | 7 mm |
| Width | 3 mm |
| Flange Outer Dia | 8.1 |
| Flange Thickness | 0.8 |
| Ring Material | 440C Stainless Steel |
| Balls Material | Silicon Nitride(Si3N4) |
| Cage Material | Stainless Steel |
| Dynamic Radial Load | 75 lbf |
| Static Radial Load | 24 lbf |
| Max Speed (X1000 rpm) | 94 |
| Lubrication | Ld Dry Lube |
| Shaft Mount Type | Press Fit |
| Temperature Range | -86 to 230 °F |
| ABEC Rating | Abec#3/isop6 |
| Radial Clearance Trade No | MC3 |
| Ball Grade | 10 |
| RoHS | Compliant |
| REACH | Compliant |
$7.62
- Fast Global Shipping
- OEM/ODM Services
- Technical support & design
- Quality Control
- Worldwide customer base
SMF73C-ZZ #3 LD is a hybrid ceramic flanged ball bearing. Radial guidance and flange location define the main selection questions for this construction. Its dimensional envelope is bore 3 mm, outside diameter 7 mm, and width 3 mm. The enclosure is shielded. Consider these features as parts of the installed contact system, together with component materials and the actual duty, rather than treating the ceramic designation as a performance rating.
Radial Guidance with a Locating Flange
The main outside-diameter seat supports the outer ring radially. The flange provides an additional housing-side locating face. These interfaces have different roles: a flange cannot replace continuous radial support or establish an extra load rating by itself. The construction entry for SMF73C-ZZ #3 LD is Single Row. Its stated load direction is Radial. The ball-grade entry is 10, distinct from the complete bearing’s precision notation.
Check the housing face and the bore together. If the face is tilted relative to the bore, tightening against the flange can distort the ring rather than locate it accurately. Nearby shoulders and components also need room for the flange, even when the main bearing envelope matches the intended seat. Establish the flange dimensions from an unambiguous dimensional reference before setting the housing-face clearance.
Choosing the Component Combination
The rings material is 440C Stainless Steel. The rolling elements material is Silicon Nitride(Si3N4). The cage material is Stainless Steel. Keep each material tied to its own part. A rolling-element compound does not identify the rings, and the cage remains a separate choice with its own guidance and lubricant-compatibility requirements.
Hybrid construction combines ceramic rolling elements with non-ceramic rings. This makes the contact pair central to thermal and elastic behavior. Different expansion rates can change the installed clearance, while rolling-element mass and stiffness affect contact response. These are engineering relationships to evaluate, not evidence of a particular machine’s insulation, maximum speed or service life.
Interpreting the Operating Data
The load data for SMF73C-ZZ #3 LD include dynamic radial rating 75 lbf and static radial rating 24 lbf. Dynamic and static ratings are not alternative labels for the same operating limit. Dynamic data support a rolling-load life assessment; static data address the risk of lasting contact deformation. Resolve the forces at the bearing and apply the appropriate calculation before comparing the machine duty with either value.
The speed entry is 94 × 1,000 rpm. The temperature-range entry is -86 to 230 °F. Use these entries with the applicable enclosure, cage and lubrication conditions. A reference speed is not automatically a limiting speed, and a broad temperature entry does not establish continuous operation at every speed or load across that range. Heat generated at the contacts and removed through the surrounding structure must also be considered.
Enclosure and the Lubricated Contact
The shielded enclosure of SMF73C-ZZ #3 LD sets the immediate boundary around the rolling contacts. Shields form a barrier without implying the same contact arrangement as a seal. Their presence alone does not establish a protection grade or a maintenance interval. The enclosure-count entry is Two Shields. Its barrier-material entry is Stainless Steel, separate from ring and rolling-element materials.
The lubrication entry is Ld Dry Lube. This describes the supplied or required condition, not an unlimited dry-running approval. Select lubricant type and quantity for the contact pair, cage, enclosure and duty. Changing a grease or an oil supply can change drag, replenishment and heat removal even when the dimensional fit remains the same.
Assembly Accuracy and Internal Freedom
Plan the assembly force through the part being fitted. Passing a press force through the rolling contacts risks local damage rather than seating the ring cleanly. Square shoulders, clean seats and controlled support around the circumference help retain the intended geometry. Clamping should locate the bearing without forcing a distorted seat into the rings. The shaft-mount entry is Press Fit.
The precision notation is Abec#3/isop6. Retain that notation without assigning an unverified equivalence to another standard. The radial-clearance entry is MC3. Precision, initial clearance and installed preload describe different aspects of the assembly. Interference and temperature differences can alter the running internal condition. Check shaft and housing fits, seat form and shoulder runout together; a close dimensional match cannot establish the accuracy of the complete rotating system.
Mating Surfaces and the Duty Cycle
Check shoulder diameters, fillets and chamfer clearance against the complete dimensional drawing. A fillet that interferes with a ring corner prevents full seating, while an inadequate abutment can leave the load-carrying face poorly supported. These dimensions concern distinct surfaces and must not be substituted for the main bore, outside diameter or width.
For SMF73C-ZZ #3 LD, assess starts, steady rotation, load changes and stops as parts of the same duty. The governing load case may not occur at the highest speed. Thermal growth can also shift the load between supports, so verify the locating arrangement, remaining clearance and lubricant supply over the operating cycle rather than at one nominal condition.
Matching the Bearing to the Support Arrangement
Choose SMF73C-ZZ #3 LD by matching its contact geometry and actual component configuration to the support arrangement. Verify the primary dimensions first, then orientation or axial location, load direction, enclosure and lubrication. Use the explicit ratings and precision or clearance entries where provided. Missing values need confirmation, not substitution from another ceramic product.
The important application question is whether the locating face and the radial seat can hold the intended geometry without distortion. The bearing family describes a useful construction choice. Acceptance for a particular machine still depends on the complete duty calculation and installation, not a general promise attached to its material name.


